[Archive] Regarding display
・Products marked as [Archive] are not available for sale on this site.
・Please use this page as a reference page for product details.
・Please note that we do not provide an email service to inform you of restocks.

An original fire pit from ZEST WORKS, a brand originating from Nagaoka City, Niigata Prefecture. Simple assembly structure, simple design. A rustic yet sexy bonfire stand for adults.
This excellent product can be used as a bonfire stand, skewer grill, and cooking heat source. By using only the rectangular main body, it can be used as a bonfire stand for solo or family use. In addition, by connecting the included partition board to the inside of the main body and setting the skewers on the uneven surface at the top of the main body, it can also be used as a skewer grill. Furthermore, by connecting a trivet to the top of the main body, it can also be used as a cooking heat source. The bottom has a Z-shaped air intake, which allows for efficient combustion. The weight of 3.4 kg makes the main body stable, and one of its features is that it is less likely to tip over compared to lighter bonfire stands. The main body is assembled and can be stored compactly, which is GOOD. It is also nice that it comes with a dedicated bag that is convenient to carry. Scratches and rust caused by use are not defects of the product. Please enjoy the changes over time, which are also a characteristic of iron material.

*When using a fire pit, please spread a spatter sheet to prevent damage to the ground.

“ZESTBOX-3WAY” is manufactured by Abe Shoten Co., Ltd., also located in Nagaoka City, Niigata Prefecture.
This is a product created by a collaboration between ZEST WORKS, a brand from Nagaoka, Niigata Prefecture, and Abe Shoten Co., Ltd., a company from Nagaoka, Niigata Prefecture.

【size】
・When assembling
Without trivet: width 32cm/depth 15.5cm/height 16.5cm
With trivet: width 38cm/depth 15.5cm/height 24cm
・When stored
Width 38cm/length 16.5cm/height approximately 2cm
・Thickness of iron plate: 2.3mm
・Weight: 3.4kg

[Handling precautions]
≪Precautions before use≫
●There are no instructions.
●Before use, be sure to check that there are no missing or damaged parts.
Do not use indoors, in a tent, or in places with poor ventilation. There is a risk of fire, burns, oxygen deficiency, and carbon monoxide poisoning.
●Because we use unpainted black iron plates, there may be uneven coloring, scratches, or rust.
●Depending on usage and storage conditions, the product may become rusty or discolored, but this is not a defect. Enjoy the texture that changes with each use.
●During the manufacturing process, new products may have minor scratches. There is no problem with the quality, so please use it as is.
●This product is designed as a bonfire stand. Please do not use it for any purpose other than its intended purpose.
●Please assemble according to the assembly order.
●This product has not been cleaned after manufacturing. Please wash skewers and other areas that come in direct contact with food with detergent before use.
●Be sure to lay out a sputter sheet (bonfire sheet) while using. Necessary to eliminate ground damage.

≪Precautions when igniting≫
●When using, please do not touch with bare hands and use leather gloves.
●Do not use gasoline, kerosene, alcohol, etc. as fuel or igniter. Doing so may cause a fire.
●While in use, do not place or bring flammable materials (paper, plastic, etc.) or flammable materials (spray cans) near the product.
●While making a bonfire, be careful of nearby flammable items (tents, tarps), etc.

≪Precautions after use≫
●Do not touch the main unit immediately after use, and wait until it has completely cooled before disposing of ash, etc., or removing it.
●There is a risk of damage or deformation. Avoid rapid cooling, such as by pouring water on it.
●After use, wipe off moisture and store in a dry place.
●Parts may deform due to heat. If it can be assembled, you can use it without any problems.
●We cannot accept returns due to deformation or rust after use.

[Abe Shoten]　
``I am aiming to provide services in a new field by utilizing the skills I have at my main job, a steel material store. We have launched a new brand in our outdoor category, CRAFT BAE. BAE is an English slang word that refers to a lover or something important, and CRAFT BAE's concept is to provide customers with something that is like a lover or something that is important to them while camping together. The product is made up of flat plates that can be disassembled and made compact. Maintenance such as cleaning is easy. ”

●Click here for the product introduction page of <Kikuchi Shoten>
●Click here for a list of products from Kikuchi Shoten

*“Nobu Kikuchi @ B JIRUSHI MARKET” items are sold exclusively at the Online Shop. Please note that we do not accept orders for orders (try-on applications) from stores.

◆Click here for B JIRUSHI MARKET

◆Click here for Nobu Kikuchi @ B JIRUSHI MARKET page